More 40k Titans and vehicles than you can shake a stick at!

BulldogUK · May 18, 2009, 04:38:28 PM

Bloody fantastic Mike! Have been working from a couple of pictures dragged from the FW site, awkward angles to say the least, while the basic shape is now done there are levels of detail on these two pics that will help no end!

Custom_Hobby · May 18, 2009, 04:55:52 PM

I'm glad it will help. I asked the person at the display to flip it over so I could get both sides. I thought of your titans and my up and coming project right away.

BulldogUK · May 21, 2009, 10:21:25 AM

All the building stuff done, majority of it made from foam and coated with a light-weight plaster. The fingers are movable to allow me to play around with a few 'crushed enemies of the Emperor"!

Hopefully have some time to throw some paint on it next week and get some pics of it in situ on Odin, until then here's a few pics

All the joints on the fingers/wrist, elbow and shoulder move to allow me to strike the pose

That little dot just under the elbow joint is a 40k marine!

Claw stood next to the FW Reaver.......it's BIG!

'HEY FRED, YOU SURE THIS IS THE RIGHT PART NUMBER???!'

The only way to travel!

And finally, Odin has a message to the Chaos machines out there

Custom_Hobby · May 21, 2009, 10:24:00 AM

Stunning!!

Keeper · May 21, 2009, 10:50:06 AM

Have you been offered a job, yet, Bulldog? :D

Custom_Hobby · May 21, 2009, 11:24:42 AM

SShhhhhh I am working on recruiting as we post :bludrgn2:

BulldogUK · May 24, 2009, 07:46:16 AM

I have slapped a little paint on the claw, hopefully get it test fitted sometime this week and get some pics, fingers crossed I won't have to fiddle about with the joints, built everything away from the Titan so everything was done with guestimation!

Made a couple of seals up to add a little interest, they are attached via magnets allowing them to be positioned depending on the more dynamic poses possible with the claw.

The whole thing is 2 feet from fingertip to shoulder, the actual glove itself isn't far off a 1/1 scale marine powerfist IMO (check out my hand next to the model) which has got my brain comptenplating all sorts of crazy ideas!!!

Hawkins · May 24, 2009, 08:25:23 AM

gha!!!! slapped a little paint? looks finished to me, how long from start to finish did this take you?

BulldogUK · May 29, 2009, 04:00:11 PM

think it took about a week, it was one of those projects that just seemed to build itself once I got started though, lots of fun!

Anyhow, Odin got his thumpy thing fitted the other day, few pics below, usual stuff over on his page Odin's thumpy thing

It's fully posable having articulation in fingers, thumb, wrist, elbow shoulder (2 of em!) so should have some fun striking the pose when I have made up some 'crushed enemy models'!

Close-up showing the 'gubbins'

Couple of those arty marine eye type shots here

Ok, be honest, is mounting a devastator squad ON a Titan entering the realms of power gaming? Like you wouldn't if you could! LOL

Pretty sure this may constitute an additional 3+ save!

Deep Strike Crimson Ultrawings style!

Next up, replace that vortex missile with a plasma blaster

gi6ers · May 30, 2009, 06:07:57 AM

Watchnig your descent into madness makes me feel less geeky every time :icon_wink:

:clap2: :clap2: :clap2:

Quote from: BulldogUK on May 24, 2009, 07:46:16 AM
The whole thing is 2 feet from fingertip to shoulder, the actual glove itself isn't far off a 1/1 scale marine powerfist IMO (check out my hand next to the model) which has got my brain comptenplating all sorts of crazy ideas!!!

go on....

BulldogUK · June 02, 2009, 08:07:29 AM

Been working on the the final weapon for Odin, this one is to replace the carapace mounted Vortex missile (which I was never overly chuffed with)

Super mega blaster bringer of death plasma cannon!

Hopefully will get some paint on it and mount it early next week