Custom Hobby Forum

Hobby Workbench => Painting, Converting & Sculpting => Topic started by: raginggaijin on August 03, 2008, 01:33:42 AM

Title: Workbench
Post by: raginggaijin on August 03, 2008, 01:33:42 AM
(http://img.photobucket.com/albums/v88/raginggaijin/Scientist03a.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Scientist03c.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Scientist03b.jpg)

(http://img.photobucket.com/albums/v88/raginggaijin/Grey05a.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Grey05b.jpg)

CnC welcome.
Title: Re: Workbench
Post by: Bungle on August 03, 2008, 06:51:11 AM
Top one. I presume its human and not a close to human looking alien.

The waist is too low or the legs are too short, the backside looks the same width as his waist and should be wider or his trousers will fall down.  :icon_wink:

Similar problem with the ankles.

Putty work is good on both, and the character in both faces is excellent.

I'd probably buy a cast of the little one but not the first one.
Title: Re: Workbench
Post by: Hawkins on August 03, 2008, 07:04:32 AM
na its just right for any of the villins in Freekazoid, and much better than i can do, the lil guy is aces though, cure and evil:)
Title: Re: Workbench
Post by: Custom_Hobby on August 03, 2008, 11:51:59 AM
I like the little guy. He sort of reminds me of:

(http://www.mwctoys.com/images/review_zim1_8.jpg)
Title: Re: Workbench
Post by: Balgin Stondraeg on August 03, 2008, 11:55:19 AM
Quote from: Custom_Hobby on August 03, 2008, 11:51:59 AM
I like the little guy. He sort of reminds me of:

Whereas he immediately reminds me of Calvin & Hobbes. I was half expecting to see a big toy tiger propped up next to him.
Title: Re: Workbench
Post by: raginggaijin on August 03, 2008, 12:13:46 PM
Quote from: Bungle on August 03, 2008, 06:51:11 AM
Top one. I presume its human and not a close to human looking alien.

The waist is too low or the legs are too short, the backside looks the same width as his waist and should be wider or his trousers will fall down.  :icon_wink:

Similar problem with the ankles.

Putty work is good on both, and the character in both faces is excellent.

I'd probably buy a cast of the little one but not the first one.

Awesome CnC! Thank you!
Title: Re: Workbench
Post by: Bungle on August 03, 2008, 01:37:14 PM
Is the top one based on something?

The look on the face with the mouth slightly on the side, is great.
Title: Re: Workbench
Post by: raginggaijin on August 03, 2008, 04:06:54 PM
Loosely based on Dr. Horrible. I wanted to sculpt Neil Patrick's visage on it, but had a change of mind at last minute. The face is based off of my mascot, Raging Gaijin. I also want to put a ton of emotive power on the figures, so I'm trying stuff out. Just experimenting while I work; stretch the legs now while I'm figuring out my style. Hence the detail on the buttons, cloth folds, etc. It's one of the main reasons why I'm showing off my gear so I can get outside critiques that are unbiased. My s/o and family are like 'omg kewl!' but that doesn't help me grow as an Artist. >.<

I'll sculpt a Dr. Horrible that would make Joss Whedon proud. Or want to send a Cease and Desist. ;)
Title: Re: Workbench
Post by: Bungle on August 03, 2008, 04:39:35 PM
I had to do some search to see what you were on about  :icon_wink: OK Heavy critic and a bit of digging to try to find out where you want to go with your sculpting.

Are you aiming for realistic looking figures say like Ebob or BAM, slight caricatures like Artizan Copplestone and Heresys newest stuff, or cartoon proportions and look like the alien.

The face looks caricature to cartoony as do the hands. They would go well on a Artizan Copplestone or new Heresy figure or on a cartoon like figure

The feet look cartoony, not quite realistic shaped for the caricature ranges but very suitable for your Alien type figures.

The overall proportions are great cartoony proportions, but way out for the Artizan /Heresy type caricatures.

if you decide to go the route to make things in a comic book caricatures like Heresy and Artizan rather than cartoons the  anatomy needs to be more realistic and some of the edges sharper, like the goggles.

I would actually suggest you contact Andy at Heresy and ask for a couple of human dollies, and have a go at redoing the figure over one of those which would get the anatomy right and matching in with his ranges, the existing face would be wonderful.

He wants non coms.. doctors mechanics etc for the sci fi range, I think this would be suitable as a concept but needs work to fit in with his range.

If he likes it he will pay a good rate for it.

I think you could have a good chance if you want to have a go and tighten bits up on the sculpt.

Oh well there you go, my harsh critic again. Have a look at Artizan and copplestone figures for ideas on how the long coat flows and folds, have a read of what Andy wants, sharp edges on belts and buckles etc.

The copplestone trousers always look comic book style with the sharp crease along the front.

I look forward to seeing more of your stuff, and buying casts too.


edit link to Heresys heretics ball sculpting comp (http://heresyminiatures.com/forumofdoom/index.php?topic=8873.0)

Title: Re: Workbench
Post by: raginggaijin on August 03, 2008, 07:20:43 PM
Dude, thanks so much for the advice! I'll definitely check out the companies and contact Heresy for some dolls.

Thanks again!
Title: Re: Workbench
Post by: raginggaijin on August 06, 2008, 02:14:08 AM
Holy crud*, I want to sculpt like Tom Meier and Dennis Mize.  :icon_eek:
Title: Re: Workbench
Post by: Bungle on August 06, 2008, 05:21:47 AM
LOL.. don't sculpt like Tom.. his stuff is a pain to paint
Title: Re: Workbench
Post by: raginggaijin on August 06, 2008, 10:47:04 AM
Too many fiddly bits?

He and Dennis are like Fine Art Sculptors, only in 28-30mm. Amazing stuff.
Title: Re: Workbench
Post by: raginggaijin on August 09, 2008, 03:24:40 AM
Okay, got rid of the Robin/Bluntman eye mask and replaced with goggles that have edges and are following the current trend. It was interesting learning how to do it but worth it. Though I'd love to know how to do it easier. >.<

(http://img.photobucket.com/albums/v88/raginggaijin/Scientist03d.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Scientist03e.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Scientist03g.jpg)

Also finishing the Bard. Named after my first wife. The biggest problem I have with this sculpt is design. I set it up in c-p but when it came down to preparing for casting I had problems with gap-osis, as well as figuring out how to shift the toon so the tab makes it castable. It's been a fantastic adventure so far! The gun is from Hasslefree. They make superb gear, and allow it to be used by fellow sculptors, even in commercial ventures. So I do my part to help them since the quality of their sculpts is what I aspire to be like.

(http://img.photobucket.com/albums/v88/raginggaijin/Bard01a.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Bard01d.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Bard01c.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Bard01b.jpg)
Title: Re: Workbench
Post by: Bungle on August 09, 2008, 05:03:54 AM
I like the new goggles alot. I can see the hair better in these photos too.  :clap2:

Bard
Face: I like her
Hair: great shapes really effective
Anatomy: very human proportions however the legs look a bit thin and uneven around the knees from the photos.

The arms look a little thin too, which make the hands looks huge, I would expect finer hands on such a thin boned person. 

Hands: good job on sculpting individual fingers, but they look a little fat for the rest of her, thy thickening the arms and legs up a bit to give them a more curvey shape and strengthen the limb joints which will be a weak point in a cast.

Guitar: the body of the V looks good, the neck looks a little soft. Try carving it to get sharper edges, or adding BS to carve.

Overall pose: she seems to be tilting her head back, is she a short sculpt? so looking up at others? nice pose, I like the way the dress is done, simple and good for painting, to folds look Ok in the thin material of her skirt and it flows pretty well..

Shoes.  Do they need a sole? and a bit of tidyng up on the inside ankle of the left boot.

Overall I might buy a cast as is, but more likely to if her limbs were shaped up a bit.

Now its time for the sculptors to give you tips  :tip-hat:

Keep at it
Title: Re: Workbench
Post by: raginggaijin on August 09, 2008, 12:15:56 PM
Quote from: Bungle on August 09, 2008, 05:03:54 AM
I like the new goggles alot. I can see the hair better in these photos too.  :clap2:

Bard
Face: I like her
Hair: great shapes really effective
Anatomy: very human proportions however the legs look a bit thin and uneven around the knees from the photos.

I can bulk them up a bit. I still have to smooth out the legs and arms and can do it at that time.

QuoteThe arms look a little thin too, which make the hands looks huge, I would expect finer hands on such a thin boned person. 

Hands: good job on sculpting individual fingers, but they look a little fat for the rest of her, thy thickening the arms and legs up a bit to give them a more curvey shape and strengthen the limb joints which will be a weak point in a cast.

Good point. This was a mistake on my part due to the initial blocking out. To remedy this on future sculpts, I'll have to have the hand/palm start smaller. I did it proper with the arms, but the hands... >.<

QuoteGuitar: the body of the V looks good, the neck looks a little soft. Try carving it to get sharper edges, or adding BS to carve.

The guitar was the pain to create. In the future project I need to have Brown Stuff or straight ProCreate to ensure ease of filing. I had some Fimo cutting this batch of ProCreate, which made it more malleable than I wanted. Learning how to do stuff can be frustrating some times, especially when I'm trying out different mixes for best results.

QuoteOverall pose: she seems to be tilting her head back, is she a short sculpt? so looking up at others? nice pose, I like the way the dress is done, simple and good for painting, to folds look Ok in the thin material of her skirt and it flows pretty well..

She's haughty, putting her nose up. I took the pose from an Amy Winehouse pic. =P

QuoteShoes.  Do they need a sole? and a bit of tidyng up on the inside ankle of the left boot.

I can do those.

QuoteOverall I might buy a cast as is, but more likely to if her limbs were shaped up a bit.

Now its time for the sculptors to give you tips  :tip-hat:

Keep at it

Thanks again, Bungle! I'll post finished pics here along with current WiPs. This is really helping me out!
Title: Re: Workbench
Post by: raginggaijin on September 20, 2008, 11:09:40 PM
Here's the painted. Teh Grey, Dr. Horrid, and Amy.

(http://img.photobucket.com/albums/v88/raginggaijin/notZim01a-1.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Scientist03b-1.jpg) (http://img.photobucket.com/albums/v88/raginggaijin/Amy01d.jpg)
Title: Re: Workbench
Post by: Keeper on September 21, 2008, 01:56:48 PM
Nice :D  They all look great!  :tip-hat: